IBM 5790 PCI-X Expansion Drawer 32N1257 22R3958 22R5594 FC5790 w/Power Supplies

Description

IBM 5790 PCI-X Expansion Drawer 32N1257 22R3958 22R5594 FC5790 w/Power Supplies
Some adapters must be placed in specific Peripheral Component Interconnect-X (PCI-X) slots to function correctly or perform optimally. Use this information to determine where to install PCI and PCI-X adapters.
The
5790
is a 19-inch, four EIA unit I/O expansion drawer that provides six full length, 64-bit, 3.3-V, 133 MHz hot-plug PCI-X slots. The I/O Expansion drawer is attached to the system using a RIO-2 bus interface adapter. The
5790
includes redundant concurrently maintainable power and cooling and the blind swap PCI mechanism allows for PCI card servicing without removing the I/O expansion drawer The 5790 mounts in a 19-inch rack using a 7307 Dual I/O Unit Enclosure or a 7311 Dual I/O Unit Enclosure. Two
5790
drawers can be mounted side by side in a single 7307 or 7311 and are not required to be attached to the same system
You need one diagram for each expansion unit that is attached to the system unit. Copy the diagram for your use.
Configuration notes:
IOPs control IOAs in the direction of slots 1 → 3, and 4→ 6.
Resource name:
______________________________
The following table shows the slot properties and PHB connections.
Table 1. Slot location descriptions
PHB1
PHB2
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Long
Long
Long
Long
Long
Long
64-bit 3.3V, 133 MHz
64-bit 3.3V, 133 MHz
64-bit 3.3V, 133 MHz
64-bit 3.3V, 133 MHz
64-bit 3.3V, 133 MHz
64-bit 3.3V, 133 MHz
Un-P1-C1
Un-P1-C2
Un-P1-C3
Un-P1-C4
Un-P1-C5
Un-P1-C6
Slots C1 through C6 are compatible with PCI, PCI-X, and PCI-X DDR adapters. PCI-X DDR would operate at PCI-X speeds.
Short adapters can go in short or long slots.
These are large heavy units, if you feel the shipping is out of line, you can pick them up locally in Dayton, Ohio or we can deliver to our local The Packaging Store and you can arrange packing and shipping with them. We just base our shipping on what Fedex quotes us.
These are large heavy units, if you feel the shipping is out of line, you can pick them up locally in Dayton, Ohio or we can deliver to our local The Packaging Store and you can arrange packing and shipping with them. We just base our shipping on what Fedex quotes us.